Kb-electronics KBWS-25D Manuel d'utilisateur télécharger pdf (Page 23)

Note: In some applications, especially those requiring the motor to

cycle on and off or from one speed to another or from stop to high

speed, the CL LED may blink, indicating a transient overload. This may

be a normal condition for the application.

4. Proper Plug-In Horsepower Resistor® is not installed. See Table 3, on page 12.

XI. OPTIONAL ACCESSORIES

Complete instructions and connection diagrams are supplied with all accessories to

facilitate installation.

A. DIN Rail Mounting Kit (P/N 9995) – Allows mounting of the control to a DIN rail.

B. Product Safety Module (PSM) (P/N 8611) – Protects the machine operator

from injury due to a runaway or uncontrolled acceleration condition.

C. AC Line / Armature Fuse Kit (P/N 9849)

1 2 ... 18 19 20 21 22 23 24 25

Pas de commentaire

Kb-electronics KBWS-25D Manuel d'utilisateur Page 23