Kb-electronics KBDF-48 Manuel d'utilisateur télécharger pdf (Page 18)

7 MOUNTING INSTRUCTIONS

It is recommended that the drive be mounted vertically on a flat surface with adequate

ventilation. Leave enough room above and below the drive to allow for AC Line, motor

connections, and any other connections that are required. Care should be taken to avoid

extreme hazardous locations where physical damage can occur. When mounting the drive in an

enclosure, the enclosure should be large enough to allow proper heat dissipation so that the

ambient temperature does not exceed 40 °C (104 °F) at full rating. See Figure 4, below, and

Figure 5, on page 19.

WARNING! DO NOT USE THIS DRIVE IN AN EXPLOSIVE ENVIRONMENT. AN

EXPLOSION CAN CAUSE SERIOUS OR FATAL INJURY. THIS DRIVE IS NOT EXPLOSION

PROOF.

FIGURE 4

CASE "A" DRIVES MECHANICAL SPECIFICATIONS (INCHES / mm)

7.25

184

KBDF SERIES

71.1

2.80

86.4

3.40

6.785

172

5.10

130

REV

FWD

STOP

RUN

0.225

5.72

4X Ø

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 72 73

Pas de commentaire

Kb-electronics KBDF-48 Manuel d'utilisateur Page 18