Kb-electronics IODA, Input/Output Module for use with all KBDA/KB Manuel d'utilisateur télécharger pdf (Page 31)

4.8 ANALOG SIGNAL OUTPUT

Two analog signal outputs are provided, which will linearly follow the parameter

programmed in Analog output 1 Mode (Function No. 8.06) and Analog Output 2

Mode (Function No. 8.08). They can be used to monitor Motor Frequency, Set

Frequency, Motor Voltage, Bus Voltage, and Motor Current. See Figure 24 for

Analog Output 1 and 2 Gain settings (factory set to 100%). See Table 18 for

Analog Outputs 1 and 2 electrical ratings. See Figure 25, on page 32, for

connections. See Table 19, on page 32, for drive programming.

Analog Output 1 provides a voltage signal output. Analog Output 2 provides a

voltage or current signal output.

FIGURE 24

ANALOG OUTPUTS "1" AND "2" GAIN

TABLE 18

ANALOG OUTPUTS "1" AND "2" ELECTRICAL RATINGS

Parameter Specification Factory setting

Analog Outputs 1 and 2 Voltage Range (Volts DC) 0 – 5 0 – 5

Analog Output 2 Current Range (mA DC) 0 – 20, 4 – 20 –

Analog Output 2 Impedance for Current Mode (Ω) 150 –

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 43 44

Pas de commentaire

Kb-electronics IODA, Input/Output Module for use with all KBDA/KB Manuel d'utilisateur Page 31